Snmp Trap Enable; Ssh - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
System Configuration and Monitoring

SNMP TRAP ENABLE

snmp trap enable
D
ESCRIPTION
This command enables the agent to send the SNMP traps to the configured host.
P
ARAMETERS
None.
E
XAMPLE
ALU(config)# snmp trap enable

SSH

ssh [vrf <vrf-name>] {<ip-address>|<hostname>} <user-name>
[version {1|2}]
D
ESCRIPTION
Use this command to access a remote computer by SSH.
P
ARAMETERS
vrf-name
ip-address
hostname
user-name
version {1|2}
P S
LATFORMS UPPORTED
OmniAccess 740, 780
E
XAMPLE
ALU(config)# ssh 172.25.19.1 root
The authenticity of host '172.25.19.1(172.25.19.1)' can't be
established.
RSA key fingerprint is
b5:b8:c9:6b:0e:28:df:a8:b0:06:7a:23:7f:03:96:6b.
126
Beta
Parameter
Alcatel-Lucent
Description
Name of the VRF. If the VRF name is specified,
the packets will be routed using the routing
table of the specified VRF on a interface
associated with the VRF.
IP Address of the remote system.
Host name of the remote system.
The login/user name to be used.
SSH version number - version 1 or version 2.
OmniAccess 700 CLI Command Reference Guide
Beta