Aaa Login-Fail Banner; Aaa Method-List - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

-
AAA LOGIN FAIL BANNER
aaa authentication fail-message <delimiter> <multi-lined
string> <delimiter>
D
ESCRIPTION
This command is used to enter a descriptive message to be displayed after a
failed login attempt.
P
ARAMETERS
delimiter
multi-lined string
delimiter
E
XAMPLE
ALU(config)# aaa authentication fail-message $Login failed!$
-
AAA METHOD LIST
aaa method-list <name> <methods>...
D
ESCRIPTION
This command is used to configure a method-list. A method list can be
successfully configured only if the lists do not contain any invalid method like –
empty radius/TACACS+ groups, etc.
P
ARAMETERS
name
methods
E
XAMPLE
ALU(config)# aaa method-list m1 rad1 tac1 local
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
Parameter
Alcatel-Lucent
Description
Delimiting character to start the
message. This character will not appear
in the message to be displayed.
The message to be displayed after a
failed login attempt. (You can enter a
multi-lined descriptive message.)
Used delimiting character to end the
message.
Description
Name of the method-list.
Authentication method to be included in
the method-list.
Beta
aaa login -fail banner
45