Left running head:
Chapter name (automatic)
Point to Point Protocol
ENCAPSULATION PPP
encapsulation ppp
D
ESCRIPTION
This command is entered in the Interface Configuration mode. This command
sets the PPP encapsulation on an interface.
P
ARAMETERS
None.
D
V
EFAULT
ALUE
The default encapsulation on a serial interface is HDLC.
E
XAMPLE
ALU(config)# interface Serial1/0:0
ALU(config-if Serial1/0:0)# encapsulation ppp
NO DEBUG PPP
no debug ppp {echo|all}
The "no" command disables the debug functionality. By default, debug is
disabled.
NO ENCAPSULATION PPP
no encapsulation ppp
This command sets the encapsulation to its default, HDLC.
NO PPP AUTHENTICATION
no ppp authentication
The "no" command removes the authentication protocol for authenticating the
peer.
NO PPP AUTHENTICATION CLIENT
no ppp authentication client-password
The "no" command deletes the configured authentication password on the client
side.
NO PPP AUTHENTICATION CLIENT
no ppp authentication client-username
The "no" command deletes the configured authentication user name on the client
side.
260
Beta
-
PASSWORD
-
USERNAME
Alcatel-Lucent
OmniAccess 700 CLI Command Reference Guide
Beta