No Area Virtual-Link; Passive-Interface - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Open Shortest Path First
NO AREA VIRTUAL
no area {<0-4294967295>|<ip-address>} virtual-link <router-id>
[authentication [message-digest|null] [[hello-
interval|retransmit-interval retransmit-interval|transmit-
delay|dead-interval] <1-8192>] authentication-key <0-0> <key>]|
message-digest-key <1-255> md5 <key>]]
The "no" command removes the virtual link with neighbor specified by router ID.
-
PASSIVE INTERFACE
passive-interface {{GigabitEthernet|Serial} <slot/
port>|Loopback <0-14487>|default}}
D
ESCRIPTION
This command is used in the Router Configuration mode. This command
suppresses sending of routing update packets and OSPF hello packets through
the specified interface.
P
ARAMETERS
Parameter
{GigabitEthernet
|Serial} <slot/
port> Loopback
<0-14487>
default
D V
EFAULT ALUE
Routing updates are sent on enabled interfaces.
E
XAMPLE
ALU(config-router ospf 30)# passive-interface GigabitEthernet
7/0
478
Beta
-
LINK
Interface name with its slot and port number.
All interfaces become passive. The default keyword is
useful in Internet Service Providers (ISPs) and large
enterprise networks where the distribution routers have
more than 200 interfaces.
Alcatel-Lucent
Description
OmniAccess 700 CLI Command Reference Guide
Beta