Table of Contents
Advertisement
SHOW IP OSPF INTERFACE
show ip ospf [<1-65535>] interface [{GigabitEthernet|Serial}
<slot/port>|Loopback <0-14487>|statistics}]
D
ESCRIPTION
Enter this command in Super User mode or Router Configuration mode. This
command displays OSPF-related interface information.
P
ARAMETERS
1-65535
{GigabitEthernet|Serial}
<slot/port> Loopback <0-14487>
statistics
E
XAMPLE
E
1
XAMPLE
ALU# show ip ospf interface
GigabitEthernet7/0 is up, line protocol is up
Internet Address 1.1.1.2/24, Area 0
Process ID 1, Router ID 1.1.1.2, Network Type BROADCAST, Cost: 1
Transmit Delay is 1 sec, State DR, Priority 1
Designated Router (ID) 1.1.1.2, Intf address 1.1.1.2
Backup Designated router (ID) 1.1.1.1, Intf address 1.1.1.1
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:03
Neighbor Count is 1, Adjacent neighbor count is 1
Adjacent with neighbor 1.1.1.1
Suppress hello for 0 neighbor(s)
Message digest authentication enabled
GigabitEthernet7/1 is up, line protocol is up
Internet Address 2.2.2.2/24, Area 1
Process ID 1, Router ID 1.1.1.2, Network Type BROADCAST, Cost: 1
Transmit Delay is 1 sec, State BDR, Priority 1
Designated Router (ID) 6.6.6.6, Intf address 2.2.2.1
Backup Designated router (ID) 1.1.1.2, Intf address 2.2.2.2
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:03
Neighbor Count is 1, Adjacent neighbor count is 1
Adjacent with neighbor 6.6.6.6
Suppress hello for 0 neighbor(s)
ALU
#
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
Alcatel-Lucent
show ip ospf interface
Description
Process ID. If this argument is included,
only information for the specified routing
process is displayed.
Interface name with its slot and port
number.
Displays the OSPF statistics.
(Backup Designated Router)
(Designated Router)
Beta
495
Advertisement
Table of Contents
