Fair-Queue; Frame-Relay Qos-Bandwidth Percent - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

-
FAIR QUEUE

fair-queue

D
ESCRIPTION
This command is used in the Class mode. This command is used to enable fair
queue on the Default Class.
P
ARAMETERS
None.
D V
EFAULT ALUE
None.
E
XAMPLE
ALU(config-qos-P1-C1)# class class-default
ALU(config-qos-P1-class-default)# fair-queue
-
FRAME RELAY QOS
frame-relay qos-bandwidth percent <0-100>
D
ESCRIPTION
This command is used to configure bandwidth on an interface (PVC). This
configuration overrides the default bandwidth sharing.
P
ARAMETERS
0-100
D V
EFAULT ALUE
None.
P S
LATFORMS UPPORTED
OmniAccess 740, 780
E
XAMPLE
ALU(config-if Serial 0/0:0)# frame-relay qos-bandwidth percent
30
R H
ELEASE ISTORY
Release 2.3: command was introduced.
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
-
BANDWIDTH PERCENT
Parameter
Alcatel-Lucent
Description
The bandwidth in percentage.
Beta
fair-queue
783