Area Default-Cost - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

-
AREA DEFAULT
area {<0-4294967295>|<ip-address>} default-cost <0-16777215>
D
ESCRIPTION
Enter this command in the Router Configuration mode. This command specifies
the cost for the default summary route sent into a stub or NSSA.
P
ARAMETERS
Parameter
0-4294967295
ip-address
0-16777215
D V
EFAULT ALUE
Default cost is 1.
E
XAMPLE
ALU(config-router ospf 30)# area 1 default-cost 100
OmniAccess 700 CLI Command Reference Guide
Beta
COST
OSPF area ID as a decimal value.
OSPF area ID in IP address format.
Cost for the default summary route used for a stub or NSSA.
The acceptable value is a 24-bit number.
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Description

area default-cost

457
Beta