-
AGGREGATE
ADDRESS
aggregate-address {<ip-address subnetmask>|<ip-address/prefix-
length>} [{{suppress-map|advertise-map|attribute-map|route-map}
<map-name>}|as-set|summary-only}]
D
ESCRIPTION
Enter this command in the Address Family or Router Configuration mode. This
command configures BGP aggregate entries.
P
ARAMETERS
Parameter
address
mask
as-set
summary-only
suppress-map
advertise-map
attribute-map
map-name
D
V
EFAULT
ALUE
None.
E
XAMPLE
ALU(config-router bgp AS30)#aggregate-address 35.0.0.0/8
advertise-map admap1
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Aggregate IP address.
Aggregate IP address mask.
Generates autonomous system set path information.
Advertises summary addresses only.
Route map used to selectively suppress routes in the
aggregate range.
Name of the route map to create AS-SET origin
communities.
Name of route map used to set the attribute of the
aggregate route.
Name of the route map.
Alcatel-Lucent
aggregate-address
Description
Beta
405