Upgrade: Software Upgrade - Set As Default - Alcatel-Lucent OmniAccess 700 User Manual

S O
ET THER
The package that comes with OA-700 system is always set as default package.
If you install another package and would like to set that newly installed package as
default package, use the following procedure.
The system can have multiple application packages (like 2.1.7.1, 2.1.8.1). The
package being set as default should exist in the system.
1. Install a new package. Refer
newly installed package is listed under Other Package table.
2. Click Set as Default icon under the Action column in Other Package table. This
opens Set as Default page.
Figure 199: Upgrade: Software Upgrade - Set as Default
3. Select Save Running Configuration check box to save the running
configuration. The device comes up with the current running configuration after
restart if this option is selected.
4. Click Yes to continue to confirm setting the selected package as default or click
No to cancel the operation.
Web GUI Users Guide
Beta
P D P
ACKAGE AS EFAULT
"Install Package"
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
ACKAGE
section to install new package. The
Maintenance
305
Beta