Show Match-List - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

-
SHOW MATCH LIST
show match-list [<name>]
D
ESCRIPTION
This command displays the details of all the match-lists that are configured.
Specify the match-list name to view the details of a specific match-list.
P
ARAMETERS
Parameter
name
E
XAMPLE
The following example displays details of all the match-lists configured:
ALU(config-match-list-m1)#show match-list
match-list m1
1 icmp any any
2 tcp any any service http
3 ip any any type ftp
match-list m2
1 tcp any any service ssh
match-list m3
1 udp any any
The following example displays the details of match-lists m1and m2:
ALU(config-match-list-m1)# show match-list m1
match-list m1
1 icmp any any
2 tcp any any service http
3 ip any any type tftp
ALU(config-match-list-m1)# show match-list m2
match-list m2
1 tcp any any service ssh
2 udp any any
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Name of the match-list whose details is to be viewed.
Alcatel-Lucent

show match-list

Description
Beta
331