Show Ip Igmp Interface - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

SHOW IP IGMP INTERFACE

show ip igmp interface [<interface-name>]
D
ESCRIPTION
Enter this command in the Super User mode or Configuration mode. This
command displays all interfaces on which the IGMP is enabled, and displays
configured/default values of the IGMP interface parameters.
P
ARAMETERS
Parameter
interface-name
E
XAMPLE
ALU# show ip igmp interface
GigabitEthernet3/0 Internet address 7.7.7.3 Mask 255.255.255.0
Host version 2 Router Version 2
Query Interval = 125
Querier Timeout = 255
Max query response time = 10
Last member query count = 2
Last member query response time = 1000
Access Group set = 0
Number of joins on this interface = 84
Number of leave message on this interface = 7
Querier on this interface = 7.7.7.3
Interface DR is 7.7.7.3
Total groups on this interface
Group 1
OmniAccess 700 CLI Command Reference Guide
Beta
Displays IGMP interface parameters for specified interface.
224.1.1.1
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Description
1
show ip igmp interface
531
Beta