Ip Vrf Forwarding - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

IP VRF FORWARDING

ip vrf forwarding <vrf-name>
D
ESCRIPTION
Enter this command in the Interface Configuration mode. This command is used
to associate a VRF on an interface.
Note: IP address configuration on the interface is removed when this command is executed.
Hence, associate a VRF to an interface prior to IP address configuration.
P
ARAMETERS
vrf-name
P S
LATFORMS UPPORTED
OmniAccess 740, 780
E
XAMPLE
ALU(config-if GigabitEthernet3/0)# ip vrf forwarding ALU-vrf
R H
ELEASE ISTORY
Release 2.3: command was introduced.
OmniAccess 700 CLI Command Reference Guide
Beta
Parameter
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Description
The name of the VRF to be associated to an
interface.
ip vrf forwarding
551
Beta