Show Interfaces Mlppp - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

SHOW INTERFACES MLPPP

show interfaces mlppp <1-256>
D
ESCRIPTION
This command displays the LFI configuration on the MLPPP bundle interface
specified.
P
ARAMETERS
1-256
P S
LATFORMS UPPORTED
OmniAccess 740, 780
E
XAMPLE
ALU(config)# show interface mlppp 100
mlppp100 is up, line protocol is up
Internet address is 20.20.20.20/24
MTU 1494 bytes, BW 512 Kbit, DLY 0 usec,
reliability 255/255, txload 10/255, rxload 10/255
Encapsulation mlppp, loopback not set
IPCP: Open
Last input never, output never, output hang never
Last clearing of "show interface" counters never
2 packets input (2 Control packets, 0 Data packets), 28 bytes
2 packets output (2 Control packets, 0 Data packets), 28 bytes
0 packets dropped, 0 giants received
Fragmentation: Fragment Delay 10 ms
5 fragmented, 0 couldn't fragment
10 fragments created, 0x9 sent sequence
Reassembly: Slippage MRU 16
0 fragments in reassembly list
0 lost fragments, 0 reordered
11 discarded fragments, 0 reassembled
0 timeouts, 0 couldn't reassemble
0 fragments received, 0xb received sequence
R H
ELEASE ISTORY
Release 2.3: command was modified.
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
Alcatel-Lucent
show interfaces mlppp
Description
Bundle Identification. This varies from 1-
256.
Beta
309