Show Ip Rip Interfaces - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

SHOW IP RIP INTERFACES

show ip rip interfaces [vrf <vrf-name>]
D
ESCRIPTION
Enter this command in the Super User mode. Displays summary address entries
in the RIP database.
P
ARAMETERS
Parameter
vrf-name
P S
LATFORMS UPPORTED
OmniAccess 740, 780
E
XAMPLE
ALU# show ip rip interfaces
Interface
GigabitEthernet7/0
GigabitEthernet7/1
(Flags - U: Unnumbered P:Passive B:V2 Broadcast S:Split horizon disabled)
ALU
#
Interface
Interface
Address
Interface
Mask
Send Ver
Recv Ver
Flags
R H
ELEASE ISTORY
Release 2.3: Parameter [vrf <vrf-name>] was added.
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Name of the VRF.
RIP Interface Table
-------------------
Interface Address Interface Mask
1.1.1.2 255.255.255.0
10.91.2.6 255.255.255.0
The interface-type.
IP address of the interface.
Interface mask in four part dotted decimal format.
The Send version.
The Receive version.
Values are:
•
U: Unnumbered
•
P: Passive
•
B: V2 Broadcast
•
S: Split horizon disabled
Alcatel-Lucent
show ip rip interfaces
Description
Send Ver Recv Ver
2 2
2 2
Beta
Flags
B S
395