Service-Policy <Child Policy-Map Name - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Quality of Service
-
SERVICE POLICY
service-policy <child policy-map name>
D
ESCRIPTION
This command is entered in the Class mode. This command sets a policy-map as
a child policy.
Note: Direction parameter is not required here.
P
ARAMETERS
child policy-map name
D V
EFAULT ALUE
None.
E
XAMPLE
Create policies p1 and p2 and configure traffic class c1 and c2 in each of the
policy.
ALU(conifg)# policy-map p1
ALU(config-qos-p1)# class c1
ALU(config-qos-p1-c1)#
ALU(conifg)# policy-map p2
ALU(config-qos-p1)# class c2
ALU(config-qos-p1-c2)#
Now, policy p2 can be included in the policy p1 using the 'service-policy
command.
ALU(conifg)# policy-map p1
ALU(config-qos-p1)# class c1
ALU(config-qos-p1-c1)# service-policy p2
796
Beta
<
CHILD POLICY
Parameter
Alcatel-Lucent
- >
MAP NAME
Description
Use this to set a policy-map as a child policy.
OmniAccess 700 CLI Command Reference Guide
Beta