Interface Mlppp; Encapsulation Mlppp - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Multilink Point to Point Protocol

INTERFACE MLPPP

interface mlppp <1-256>
D
ESCRIPTION
This command is entered in the Configuration mode. This command creates a
MLPPP bundle interface that is identified by the bundle ID.
P
ARAMETERS
1-256
D V
EFAULT ALUE
None.
E
XAMPLE
ALU(config)# interface mlppp 100
ALU(config-if mlppp100)#

ENCAPSULATION MLPPP

encapsulation mlppp <1-256>
D
ESCRIPTION
This command is entered in the Interface Configuration mode.
This command sets MLPPP encapsulation on an interface. The interface
becomes a member link of the bundle interface identified by the bundle ID.
P
ARAMETERS
1-256
D V
EFAULT ALUE
The default encapsulation on a serial interface is HDLC.
E
XAMPLE
ALU(config)#interface Serial1/0:0
ALU(config-if Serial1/0:0)# encapsulation mlppp 100
290
Beta
Parameter
Parameter
Alcatel-Lucent
Description
Bundle Identification. The range of the
bundle ID is between 1 and 256.
Description
Bundle Identification. The range of the
bundle ID is between 1 and 256.
OmniAccess 700 CLI Command Reference Guide
Beta