Tunnel Destination; Tunnel Source - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

TUNNEL DESTINATION

tunnel destination <ip-address>
D
ESCRIPTION
This command sets the destination IP address of the tunnel at the remote end.
P
ARAMETERS
ip-address
D V
EFAULT ALUE
None.
E
XAMPLE
ALU(config-if Tunnel1)# tunnel destination 2.2.2.3

TUNNEL SOURCE

tunnel source {<ip-address>|<interface-name>}
D
ESCRIPTION
This command sets the source IP address of the tunnel.
P
ARAMETERS
ip-address
interface-name
D V
EFAULT ALUE
None.
E
XAMPLE
ALU(config-if Tunnel1)# tunnel source 2.2.2.1
or
ALU(config-if Tunnel1)# tunnel source GigabitEthernet7/0
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
Parameter
Alcatel-Lucent
Description
Destination IP address of the tunnel.
Description
Source IP address of the tunnel.
Name of the interface
Beta
tunnel destination
705