Table of Contents
Advertisement
Left running head:
Chapter name (automatic)
Border Gateway Protocol
SHOW IP BGP NEIGHBORS
show ip bgp neighbors <ip-address> [advertised-routes|dampened-
routes|flap-statistics|paths [<regular-expression>]|received-
routes|routes]
D
ESCRIPTION
Enter this command in the Super User mode or Configuration mode. This
command displays information about the TCP and BGP neighbor connections.
P
ARAMETERS
Field
ip-address
advertised-
routes
dampened-routes
flap-statistics
path <regular-
expression>
received-routes
routes
E
1
XAMPLE
ALU# show ip bgp neighbors
BGP neighbor is 1.1.1.2, remote AS 100, external link
BGP version 4, remote router id 3.3.3.3
BGP state = Established, up for 00:12:08
Last read 00:00:07, Last sent 00:00:07
Hold time is 180,
Neighbor capabilities:
Route refresh: advertised and received
Address family IPv4 Unicast: advertised and received
Received 342 messages, 0 notifications, 0 in queue
Sent 333 messages, 7 notifications, 0 in queue
Minimum time between advertisement runs is 30 seconds
For Address Family IPv4 Unicast
Route refresh request: received 0, sent 0
Number of Unicast prefixes received 5
446
Beta
IP address of the neighbor. If you omit this argument, all
neighbors are displayed.
Displays all the routes the router has advertised to a BGP
neighbor.
Displays the dampened routes received from the neighbor.
Displays flap-statistics of the routes learnt from the
neighbor.
Regular expression that is used to match the paths
received.
If regular-expression is not specified, displays all the paths
received from the neighbor.
Displays all received routes (both accepted and rejected)
from the specified neighbor.
Displays all routes that are received and accepted. This is a
subset of the output from the received-routes keyword.
keepalive interval is 60 seconds
Alcatel-Lucent
Description
OmniAccess 700 CLI Command Reference Guide
Beta
Advertisement
Table of Contents
