Ipsec-Profile; Lifetime - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
IP Security - Virtual Private Network
-
IPSEC PROFILE
ipsec-profile <profile-name>
D
ESCRIPTION
Enter this command in the Tunnel Interface Configuration mode. This command is
used to attach the configured IPsec profile to the tunnel interface.
P
ARAMETERS
profile-name
D V
EFAULT ALUE
None.
E
XAMPLE
ALU(config-if Tunnel1)# ipsec-profile PF1

LIFETIME

lifetime {kilobytes <512-2147483647>|seconds <540-86400>}
D
ESCRIPTION
This command is entered in the IPsec Profile Configuration mode. This command
configures lifetime for an IPsec profile. Use Kilobytes keyword to configure lifetime
in kilobytes, and use Seconds keyword to configure lifetime in seconds for a
profile.
P
ARAMETERS
512-2147483647
540-86400
D V
EFAULT ALUE
Lifetime has a default value of 28800 seconds. There is no default value for
lifetime in Kilobytes.
E
XAMPLE
ALU(ipsec-profile-PF1)# lifetime seconds 1000
ALU(ipsec-profile-PF1)# lifetime kilobytes 1005236
700
Beta
Parameter
Parameter
Alcatel-Lucent
Description
Name of the IPsec profile.
Description
Specify the time in kilobytes.
Specify the time in seconds.
OmniAccess 700 CLI Command Reference Guide
Beta