Distance - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

DISTANCE

distance <1-255> [[ip-address subnet-mask|ip-address/prefix-
length][<1-99>|<1300-1999>]]
D
ESCRIPTION
Enter the above command in Router Configuration mode. This command is used
to define an administrative distance for RIP or OSPF or BGP.
P
ARAMETERS
Parameter
1-255
[<ip-address
subnet-mask|<ip-
address/prefix-
length>]
1-99
1300-1999
D V
EFAULT ALUE
RIP - The default distance is 120.
OSPF - The default distance is 110.
BGP - The default distance is 20 for EBGP and 200 for IBGP.
E
XAMPLE
ALU(config-router rip)# distance 130 10.0.0.0/8 20
ALU(config-router ospf 1)# distance 60 10.0.0.0/8
ALU(config-router bgp AS1)#distance bgp 30 10 5
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Sets the administrative distance for RIP or OSPF or BGP
external routes.
IP address with subnet mask.
Standard IP access list number.
Standard IP access list number.
Alcatel-Lucent
Description
Beta
distance
339