Multilink Point To Point Protocol - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

C 17
HAPTER
This chapter documents the Command Line Interface (CLI) commands for the
Multilink Point-to-Point Protocol (MLPPP). These commands are used to
configure Multilink PPP encapsulation on a T1 or E1 line card.
This guide includes table of parameters, default values, and configuration
examples for MLPPP configurations as quick-start and reference information. In
this guide, all the commands are described in alphabetical order. For more
detailed information about using and configuring the Multilink Point-to-Point
Protocol, refer to the OmniAccess 700 CLI Configuration Guide.
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
M P
ULTILINK OINT TO
Alcatel-Lucent

Multilink Point to Point Protocol

P P
OINT ROTOCOL
Beta
289