Irb Cli Commands; Interface Vlan; Show Interfaces Vlan - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Integrated Routing and Bridging
IRB CLI C
OMMANDS
This section deals with the commands related to configuring IRB on an interface.

INTERFACE VLAN

interface vlan <1-4094>
D
ESCRIPTION
This command is used to configure a VLAN.
P
ARAMETERS
1-4094
Note: Vlan ID = 1 can also be configured for IRB.
E
XAMPLE
ALU(config)# interface vlan 100

SHOW INTERFACES VLAN

show interfaces vlan <1-4094>
D
ESCRIPTION
This command displays the VLAN statistics of the VLAN-ID specified on the
interface.
P
ARAMETERS
1-4094
E
XAMPLE
ALU(config)# show interfaces vlan 10
vlan10 is up
Hardware is none, address is 0011.8b00.0e28 (0011.8b00.0e28)
Internet address is 10.91.0.1/24
MTU 1500 bytes, BW 0 Kbit, DLY 0 usec, reliability 0/255, txload 0/255,
rxload 0/255
loopback not set,
186
Beta
Parameter
Parameter
Keepalive not set
Alcatel-Lucent
Description
VLAN-ID configured on the interface.
Description
The VLAN-ID configured on the interface
whose VLAN statistics is to be viewed.
OmniAccess 700 CLI Command Reference Guide
Beta