-
MLPPP LOAD
THRESHOLD
mlppp load-threshold {high|low} {outbound|inbound} <1-255>
D
ESCRIPTION
This command is entered in the Interface Configuration mode. This command
sets the load-threshold on an MLPPP bundle.
P
ARAMETERS
high
low
outbound
inbound
1-255
D
V
EFAULT
ALUE
None.
E
XAMPLE
ALU(config-if mlppp100)# mlppp load-threshold high outbound 100
NO ENCAPSULATION MLPPP
no encapsulation mlppp
This command sets the encapsulation on a serial interface to its default, i.e.,
HDLC.
NO MLPPP LOAD
no mlppp load-threshold {high|low} {outbound|inbound}
This command removes the load threshold on the MLPPP bundle.
OmniAccess 700 CLI Command Reference Guide
Beta
Parameter
-
THRESHOLD
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Description
High threshold value.
Low threshold value.
Outbound traffic.
Inbound traffic.
Load threshold value in the range 1-255.
mlppp load-threshold
291
Beta