E
XAMPLE
ALU(config-if GigabitEthernet7/0)# ip ospf authentication
message-digest
ALU(config-if GigabitEthernet7/0)# ip ospf message-digest-
key 100 md5 passwordline
-
IP OSPF MTU
IGNORE
ip ospf mtu-ignore
D
ESCRIPTION
Enter this command in the Interface Configuration mode. Disables detection of
OSPF MTU mismatch in Database Description Packets.
P
ARAMETERS
None.
D
V
EFAULT
ALUE
By default, OSPF MTU mismatch detection is enabled.
E
XAMPLE
ALU(config-if GigabitEthernet7/0)# ip ospf mtu-ignore
IP OSPF NETWORK
ip ospf network {broadcast|non-broadcast|point-to-point}
D
ESCRIPTION
This command is used in the Interface Configuration mode. This command
configures the OSPF network type for a specified interface.
P
ARAMETERS
Parameter
broadcast
non-broadcast
point-to-point
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Specifies the OSPF broadcast multi-access network.
Specifies the OSPF NBMA network.
Specifies the OSPF point-to-point network.
Alcatel-Lucent
ip ospf mtu-ignore
Description
Beta
471