Interface Tunnel; Ip Address - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Generic Routing Encapsulation

INTERFACE TUNNEL

interface Tunnel <0-14487>
D
ESCRIPTION
This command is used to create a tunnel interface.
P
ARAMETERS
0-14487
D V
EFAULT ALUE
None.
E
XAMPLE
ALU(config)# interface Tunnel 7
ALU(config-if Tunnel7)#
Note: By default, tunnel is configured in GRE mode.

IP ADDRESS

ip address {<ip-address subnet-mask>|<ip-address/prefix-
length>}
D
ESCRIPTION
This command is used to assigns an IP address and subnet mask to the tunnel
interface.
P
ARAMETERS
{<ip-address subnet-
mask>|<ip-address/prefix-
length>}
D V
EFAULT ALUE
None.
E
XAMPLE
ALU(config-if Tunnel7)# ip address 20.20.20.20/24
728
Beta
Parameter
Parameter
Alcatel-Lucent
Description
The number specified for the tunnel.
Description
IP address with subnet mask or prefix
length.
OmniAccess 700 CLI Command Reference Guide
Beta