Left running head:
Chapter name (automatic)
DHCP (Dynamic Host Configuration Protocol) Server
IP DHCP OPTION NTP SERVER
ip dhcp option ntp-server <ip-address> [vrf <vrf-name>]
D
ESCRIPTION
Enter this command in the Configuration mode. This command is used to
configure the IP address of the Network Time Protocol server to be used by the
clients.
P
ARAMETERS
ip-address
vrf-name
D
V
EFAULT
ALUE
None.
P
S
LATFORMS
UPPORTED
OmniAccess 740, 780
E
XAMPLE
ALU(config)# ip dhcp option ntp-server 1.1.1.1
R
H
ELEASE
ISTORY
Release 2.3: Parameter [vrf <vrf-name>] was added.
822
Beta
Parameter
Alcatel-Lucent
Description
IP address of the Network Time Protocol
server.
If the VRF name is specified in the
commands, it configures the DHCP
option for the specified VRF.
If the VRF is not specified, the option is
configured for the Default VRF.
OmniAccess 700 CLI Command Reference Guide
Beta