Frame-Relay Lmi-N393Dte; No Encapsulation Frame-Relay; No Frame-Relay Interface-Dlci - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

-
FRAME RELAY LMI
frame-relay lmi-n393dte <1-10>
D
ESCRIPTION
This command is entered in the Interface Configuration mode. It sets the DTE
monitored events count.
P
ARAMETERS
1-10
D V
EFAULT ALUE
The default value is 4.
E
XAMPLE
The following example sets the DTE monitored events count to 7.
ALU(config-if serial0/0:0)# frame-relay lmi-n393dte 7
NO ENCAPSULATION FRAME

no encapsulation frame-relay

The "no" command resets the encapsulation on an interface to its default. The
default encapsulation is HDLC.
-
NO FRAME RELAY INTERFACE
no frame-relay interface-dlci <16-1007>
The "no" command deletes the configured DLCI from the interface.
OmniAccess 700 CLI Command Reference Guide
Beta
- 393
N DTE
Parameter
-
RELAY
-
DLCI
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Description
The range for DTE monitor event count.

frame-relay lmi-n393dte

253
Beta