Interface; No Vrrp Group-Id; No Vrrp Group-Id Ip; No Vrrp Group-Id Ip Ip-Address Secondary - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

INTERFACE

interface <name>
D
ESCRIPTION
This command is used in the Configuration mode. VRRP is enabled on a per-
interface basis. VRRP runs on multi-access networks, such as Ethernet. This
command is used to configure an interface.
P
ARAMETERS
name
E
XAMPLE
ALU(config)# interface GigabitEthernet7/0
ALU(config-if GigabitEthernet7/0)#
NO VRRP GROUP
no vrrp <1-8>
This command removes the primary IP address for the specified VRRP group on
an interface. VRRP group is disabled as a result.
NO VRRP GROUP
no vrrp <1-8> ip <ip-address>
This command removes the primary IP address for the specified VRRP group on
an interface. VRRP group is disabled as a result.
NO VRRP GROUP
no vrrp <1-8> ip <ip-address> secondary
This command removes only the secondary IP address from the specified VRRP
group.
NO VRRP GROUP
no vrrp <1-8> preempt
This command is used to disable pre-emption of the VRRP group.
NO VRRP GROUP
no vrrp <1-8> priority
This command restores the default priority for the VRRP group. The default
priority is 100.
OmniAccess 700 CLI Command Reference Guide
Beta
Parameter
-
ID
-
ID
IP
- -
IP IP ADDRESS SECONDARY
ID
-
ID PREEMPT
-
ID PRIORITY
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Description
Type of interface used (Gigabit Ethernet).
interface
139
Beta