Rule Prevention; Show Firewall Intrusion Sensor - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Intrusion Detection System

RULE PREVENTION

rule prevention {{{category <name>|classtype <name>| priority
{high|low|medium}|reset {category <name>|classtype <name>|
priority {high|low|medium}}}
D
ESCRIPTION
This command is used in the Intrusion Snort Configuration mode. This command
enables you to modify the group level prevention.
P
ARAMETER
category <name>
class-type <name>
priority {high|low|medium}
E
XAMPLE
ALU(config-firewall-intrusion-snort)#rule prevention category
attack-responses

SHOW FIREWALL INTRUSION SENSOR

show firewall intrusion sensor [<name>]
D
ESCRIPTION
Use this command to view instruction sensor configuration details.
P
ARAMETER
name
E
XAMPLE
ALU# show firewall intrusion sensor
firewall
intrusion sensor sensor1 snort
intrusion sensor sensor4 snort
intrusion sensor s1 snort
exit
718
Beta
Parameter
Parameter
Alcatel-Lucent
Description
Name of the Snort rule category.
Name of the Snort rule class type.
Snort rule priority: low, high or medium.
Description
Name of the sensor.
OmniAccess 700 CLI Command Reference Guide
Beta