Clear Mac-Address-Table Dynamic; Duplex - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Switching on L2 Ports
-
CLEAR MAC ADDRESS
clear mac-address-table Dynamic [slot <slot-number>|vlan <1-
4094>]
D
ESCRIPTION
This command clears the mac-address-table learnt by the system.
P
ARAMETERS
slot-number
1-4094
E
XAMPLE
ALU# clear mac-address-table Dynamic

DUPLEX

duplex {auto|full|half}
D
ESCRIPTION
This command is entered in the Interface Configuration mode. This command
configures duplex operation on an interface.
P
ARAMETERS
None.
D V
EFAULT ALUE
The default Duplex mode is "auto".
E
XAMPLE
ALU(config-if switchport1/0)# duplex full
R H
ELEASE ISTORY
Release 2.3: command was introduced.
162
Beta
-
TABLE DYNAMIC
Parameter
Alcatel-Lucent
Description
Specifies the slot number of the
interface.
User configured VLAN-ID or 1 if it is a
default VLAN-ID.
OmniAccess 700 CLI Command Reference Guide
Beta