Show Ip Ospf Request-List - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

SHOW IP OSPF REQUEST
show ip ospf [<1-65535>] request-list [neighbor-router-id]
[{GigabitEthernet|Serial} <slot/port>|Loopback <0-14487>}]
D
ESCRIPTION
This command is used to display a list of all LSAs requested by a router.
P
ARAMETERS
1-65535
neighbor-router-id
{GigabitEthernet|Serial}
<slot/port> Loopback <0-
14487>
E
XAMPLE
ALU# show ip ospf request-list
Neighbor 6.6.6.6, interface GigabitEthernet 7/1 address
2.2.2.2
Type LS ID
Checksum
1280
1280
1280
ALU#
OmniAccess 700 CLI Command Reference Guide
Beta
-
LIST
Parameter
OSPF Router with ID (1.1.1.2) (Process ID 1)
ADV RTR
192.175.142.0 1.1.1.1
192.175.206.0 1.1.1.1
192.175.15.0 1.1.1.1
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Description
Process ID. If this argument is included, only
information for the specified routing process
is displayed.
Neighbor router ID.
Displays the list of all LSAs requested by the
router on this interface from this neighbor.
Displays the list of all LSAs requested by the
router from the specified interface.
Seq NO
0x80000003
0x80000003
0x80000003

show ip ospf request-list

Age
774 0x9FFB
774 0xDC7E
774 0x1A01
501
Beta