Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual page 405

Left running head:
Chapter name (automatic)
Protocol Independent Features
Field
Routing Protocol
is 'RIP'
Sending updates
every 30 seconds
next due in 2
seconds
Invalid after
180 seconds
hold down for
180
flushed after
240
Outgoing
update...
Incoming
update...
Default version
control
Redistributing
Routing
Routing
Information
Sources
372
Beta
Specifies the routing protocol used.
Specifies the time between sending updates.
Precisely when the next update is due to be sent.
Specifies the value of the invalid parameter.
Specifies the current value of the hold-down parameter.
Specifies the time after which the individual routing
information will be flushed out.
Specifies whether the outgoing filtering list has been set.
Specifies whether the incoming filtering list has been set.
Specifies the version of RIP packets that are sent and
received.
Lists the protocol that is being redistributed.
Specifies the networks for which the routing process is
currently injecting routes.
Lists all the routing sources the Alcatel-Lucent software is
using to build its routing table. For each source, you will see
the following displayed:
•
IP address
•
Administrative distance
•
Time the last update was received from this source.
Alcatel-Lucent
OmniAccess 700 CLI Command Reference Guide
Description
Beta