Debug Firewall - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

DEBUG FIREWALL

debug firewall {session|filter|nat|attack|alg|intrusion|
selector [saddr <ip-address>|daddr <ip-address>|protocol
<number>|sport <number>|dport <number>][output|permanent]|all
[detail-level]}
D
ESCRIPTION
This command turns on debugging for specified firewall features and IDS/IPS.
The "selector" keyword allows you to debug only selected traffic.
P
ARAMETERS
saddr <ip-address>
daddr <ip-address>
protocol <number>
sport <number>
dport <number>
E
XAMPLE
The example below enables debugging for the source IP 10.91.0.52
ALU# debug firewall selector saddr 10.91.0.52
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
Alcatel-Lucent
Description
Source address.
Destination address.
Protocol.
Source port number.
Destination port number.
Beta
debug firewall
601