Ip Pim Query-Interval; No Ip Pim Sparse-Mode - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

-
IP PIM QUERY INTERVAL
ip pim query-interval <0-65535>
D
ESCRIPTION
PIM router sends periodic hello messages on all PIM enabled interfaces. Use this
command to configure this interval (in seconds).
P
ARAMETERS
Parameter
0-65535
D V
EFAULT ALUE
The default query-interval is 30 seconds.
E
XAMPLE
ALU(config-if GigabitEthernet3/0)#ip pim query-interval 50
NO IP PIM SPARSE

no ip pim sparse-mode

This command is used to disable PIM on an interface.
OmniAccess 700 CLI Command Reference Guide
Beta
Denotes the interval between periodic hello messages.
-
MODE
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Description

ip pim query-interval

519
Beta