Radius-Server - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

-
RADIUS SERVER
radius-server <ip-address> [{auth-port <1-6000> |deadtime <1-
1440>|key {5 [<string>]|<string>}|retransmit <1-100>|timeout
<1-1000>}]
D
ESCRIPTION
This command is entered in the RADIUS Server Group Configuration mode.
This command is used to add the RADIUS server of the specified IP address to a
RADIUS server group.
P
ARAMETERS
ip-address
auth-port <1-6000>
deadtime <1-1440>
key {5 [string]|<string>}
retransmit <1-100>
timeout <1-1000>
E
XAMPLE
ALU(config-srv-grp-rad1)# radius-server 1.1.1.1
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
Alcatel-Lucent
Description
IP address of the remote RADIUS server
to be added to the group.
Destination port on which RADIUS
server is listening.
The time (in minutes) that should elapse,
before you try again to connect to a non-
responding server.
This is the encryption key between the
OA-700 and the radius server.
Number of retries after each "timeout"
interval, before giving up on the server.
Number of seconds that the OA-700
should wait for a reply from the RADIUS
server before retrying.
Beta

radius-server

81