Controller - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
T1E1 Line Card

CONTROLLER

controller {E1|T1} <slot/port>
D
ESCRIPTION
This command is used in the Configuration mode.
P
ARAMETERS
E1|T1
slot
port
E
XAMPLE
ALU(config)# controller T1 0/0
ALU(config-controller T1)#
226
Beta
Parameter
Alcatel-Lucent
Description
Configures an E1 or T1 controller.
Use T1 keyword to configure a T1
controller. T1 has a transmission rate of
1.544 Mbps.
Enter the specified slot number.
Enter the appropriate port number.
OmniAccess 700 CLI Command Reference Guide
Beta