Alt-Abr; Area Authentication - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Open Shortest Path First
-
ALT ABR
alt-abr [cisco|ibm]
D
ESCRIPTION
Enter this command in Router Configuration mode. This command enables OSPF
router behavior specified in RFC 3509.
P
ARAMETERS
None.
D
EFAULT
By default, OSPF router follows ABR behavior specified in RFC 2328.
E
XAMPLE
ALU(config-router ospf 30)# alt-abr

AREA AUTHENTICATION

area {<0-4294967295>|<ip-address>} authentication [message-
digest]
D
ESCRIPTION
This command is used in the Router Configuration mode. This command enables
authentication for an OSPF area.
Use the 'message-digest' keyword to enable MD5 authentication.
The default authentication mode is Plain Text authentication.
P
ARAMETERS
Parameter
0-4294967295
ip-address
message-digest
D V
EFAULT ALUE
The default authentication is Plain Text authentication.
E
XAMPLE
ALU(config-router ospf 30)# area 1 authentication message-
digest
456
Beta
Identifier of the area for which authentication is to be
enabled. The identifier as a decimal value.
Identifier of the area for which authentication is to be
enabled. The identifier as an IP address.
Enables Message Digest 5 (MD5) authentication on the
area specified by the area-id argument.
Alcatel-Lucent
OmniAccess 700 CLI Command Reference Guide
Description
Beta