NO PPP AUTHENTICATION PASSWORD
no ppp authentication password
The "no" command deletes the configured PPP authentication password on the
server side.
NO PPP AUTHENTICATION USERNAME
no ppp authentication username
The "no" command deletes the configured PPP authentication user name on the
server side.
NO PPP IPCP ADDRESS ACCEPT
no ppp ipcp address accept-local
The "no" command sets the flag to reject the local IP address given to it by its
peer during IPCP. This is the default behavior.
NO PPP IPCP ADDRESS ACCEPT
no ppp ipcp address accept-peer
The "no" command sets the flag to reject the peer's IP address during IPCP.
NO PPP IPCP ADDRESS POOL LOCAL
no ppp ipcp address pool local
The "no" command removes the IP address pool for IPCP.
NO PPP LCP ECHO
no ppp lcp echo-interval
The "no" command sets the echo-interval to its default value. The default value is
10 seconds.
NO PPP LCP MAX
no ppp lcp max-echo
The "no" command sets the maximum number of unanswered LCP echo requests
to is default, i.e., 5.
NO PPP TIMEOUT MAX
no ppp timeout max-configure
This command sets the max-configure value to its default, i.e., 10 seconds.
OmniAccess 700 CLI Command Reference Guide
Beta
-
LOCAL
-
PEER
-
INTERVAL
-
ECHO
-
CONFIGURE
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
no ppp authentication password
261
Beta