V.35/X.21/Rs-232 Dte And Dce Configuration Commands; Clear Counters; Clockrate - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Universal Serial Port (USP) Line Card
V.35/X.21/RS-232 DTE

CLEAR COUNTERS

clear counters Serial <slot/port>
D
ESCRIPTION
This command clears the counters for the specified serial interface.
P
ARAMETERS
slot/port
E
XAMPLE
ALU# clear counters Serial 0/0

CLOCKRATE

clockrate {64000|128000|256000|512000|1024000|2048000}
D
ESCRIPTION
Enter this command in the Interface Configuration mode. This command
configures the clock rate.
Note: In RS-232 mode, maximum clock rate of 256 Kbps is supported.
P
ARAMETERS
64000|128000|256000|512000|102
4000|2048000
D V
EFAULT ALUE
The default value for clock rate is 64000 bps.
E
XAMPLE
ALU(config-if Serial0/0)# clockrate 256000
236
Beta
DCE C
AND
Parameter
Parameter
Alcatel-Lucent
ONFIGURATION
Description
Slot and port number of the serial
interface.
Description
These are values you can set for the
clock rate.
OmniAccess 700 CLI Command Reference Guide
Beta
C
OMMANDS