Encapsulation - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

ENCAPSULATION

encapsulation {frame-relay|ppp|hdlc|mlfr <bundle_id>|mlppp
<bundle_id>}
D
ESCRIPTION
This command is entered in the interface configuration mode to set encapsulation
on the interface.
P
ARAMETERS
frame-relay
ppp
hdlc
mlfr <bundle_id>
mlppp <bundle_id>
D V
EFAULT ALUE
Default is HDLC encapsulation.
E
XAMPLE
ALU(config)# interface Serial 0/0:0
ALU(config-if serial 0/0:0)# encapsulation frame-relay
ALU(config)# interface Serial 0/0:0
ALU(config-if serial 0/0:0)# encapsulation ppp
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
Alcatel-Lucent
Description
Framerelay encapsulation.
Point to Point Protocol encapsulation.
High Level Data Link Control
encapsulation.
The Multi-link Frame Relay bundle
interface that is identified by the bundle
ID.
The Multilink Point-Point Protocol bundle
interface that is identified by the bundle
ID.
Beta
encapsulation
227