Exclude Ip; Host - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
DHCP (Dynamic Host Configuration Protocol) Server

EXCLUDE IP

exclude ip <ip-address>
D
ESCRIPTION
Enter this command in the DHCP Pool Configuration mode. This command is
used to exclude an IP address from the pool. The excluded address should exist
within the configured range.
P
ARAMETERS
ip-address
D V
EFAULT ALUE
None.
E
XAMPLE
ALU(config-dhcp-pool-p2)# exclude ip 1.2.3.65

HOST

host <ip-address> <mac-address>
D
ESCRIPTION
Enter this command in the DHCP Pool Configuration mode. This command is
used to statically bind an IP address with a hardware (MAC) address. The IP
address should exist within the configured network.
P
ARAMETERS
ip-address
mac-address
D V
EFAULT ALUE
None.
E
XAMPLE
ALU(config-dhcp-pool-p2)# host 1.2.3.66 1122.aabb.55ff
816
Beta
Parameter
Parameter
Alcatel-Lucent
Description
IP address with in the network range to
be excluded.
Description
IP address with in the network range.
Hardware address of the host.
The format of the hardware address is
aaaa.bbbb.cccc.
OmniAccess 700 CLI Command Reference Guide
Beta