Neighbor Description - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Border Gateway Protocol

NEIGHBOR DESCRIPTION

neighbor {<ip-address>|<peer-group-name>} description <line>
D
ESCRIPTION
Enter this command in the Router Configuration mode. This command can be
used to associate a description to a neighbor.
P
ARAMETERS
Parameter
ip-address
peer-group-name
line
D
EFAULT
There is no description of the neighbor.
E
XAMPLE
ALU(config-router bgp AS30)#neighbor 1.1.1.1 description
linktoisp1
422
Beta
Neighbor's IP address.
Name of a BGP peer group.
Descriptive text (up to 80 characters) that describes the
neighbor.
Alcatel-Lucent
OmniAccess 700 CLI Command Reference Guide
Description
Beta