No Intrusion Sensor; No Update; Rebuild - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Intrusion Detection System

NO INTRUSION SENSOR

no intrusion sensor <name> snort
Enter this command in the Firewall Configuration mode. Use this command to
delete an intrusion sensor.
Note: You cannot delete the intrusion sensor if it is attached to a firewall policy. Detach the
sensor from the firewall policy before deleting it.

NO UPDATE

no update {passive|rebuild}
Use this command to remove the scheduled Snort rule database update.

REBUILD

rebuild <version-number>
D
ESCRIPTION
This command is used in the Intrusion Snort Configuration mode. Use this
command to manually rebuild the signature database.
P
ARAMETER
version-number
E
XAMPLE
ALU(config-firewall-intrusion-snort)#rebuild 2.3.0
714
Beta
Parameter
Alcatel-Lucent
Description
Version of the signature database.
OmniAccess 700 CLI Command Reference Guide
Beta