Snmp System; Snmp Trap - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

SNMP SYSTEM

snmp system {contact <contact-details>|location <location>|
name <name>}
D
ESCRIPTION
This command is used to configure the SNMP system contact details, system's
physical location information and SNMP system name.
P
ARAMETERS
contact-details
location
name
E
XAMPLE
ALU(config)# snmp system contact support@alcatel-lucent.com

SNMP TRAP

snmp trap <ip-address> {v1|v2c} <community-string> <1-65536>}
D
ESCRIPTION
This command configures the trap destination where the agent will send the
SNMP traps.
Note: Cannot add more than 3 trap receivers.
P
ARAMETERS
ip-address
{v1|v2c}
community-string
1-65536
E
XAMPLE
ALU(config)# snmp trap 10.1.1.1 v1 trapcommunity 162
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
Parameter
Alcatel-Lucent
Description
Contact details of the SNMP system.
Physical location of the SNMP system.
Name of the SNMP system.
Description
The host IP address to which the trap
messages are to be sent.
SNMP version: v1/v2c
SNMP v1/v2c community string.
The notification host's UDP port number
Beta
snmp system
125