Left running head:
Chapter name (automatic)
License Manager
LICENSE INSTALL
license install {fpkey:|ftp:|http:|https:|tftp:|user:}
D
ESCRIPTION
This command is used to install a license file from the given location. The license
file can be obtained from the user area or fpkey: (from the front panel USB), or it
can be obtained from a remote site using FTP, TFTP, HTTP, or HTTPS.
After issuing the command, the system displays the messages
•
if the file was successfully installed
•
status of individual licenses present in the file
If the file being installed already exists in the system, then the following message
is displayed:
License already exists.Overwrite [n]? y
P
ARAMETERS
fpkey:
ftp:
http:
https
tftp
user:
P
S
LATFORMS
UPPORTED
OmniAccess 740, 780
E
XAMPLE
This is an example of installing a license file named ipsec740.lic from a remote
location through FTP, and the file is installed successfully.
ALU(config)# license install ftp:
Address name of remote host [50.0.0.2]?
Remote Port [ Enter for default ] :
Source Path/File [/tftpboot/ipsec740.lic]? /home/testuser/
ipsec740.lic
862
Beta
Parameter
Alcatel-Lucent
Description
Install the license from fpkey: (front panel
USB).
Download the license file to be installed
through FTP from a remote location.
Download the license file to be installed
through HTTP from a remote location.
Download the license file to be installed
through HTTPS from a remote location.
Download the license file to be installed
through TFTP from a remote location.
Install the license file from the user area.
OmniAccess 700 CLI Command Reference Guide
Beta