Table of Contents
Advertisement
Left running head:
Chapter name (automatic)
T1E1 Line Card
SHOW CONTROLLER
show controller
D
ESCRIPTION
This command displays controller status that is specific to the controller hardware.
The show controller E1 command displays the status of the E1 controllers and
displays information about clocksources and other settings for the ports.
E
XAMPLE
ALU# show controller
E1 1/0 is administratively down.
E1 1/1 is administratively down.
E1 1/2 is up.
Line Card type is Channelized E1
Line termination is 120ohm
No Alarm Detected
Framing is crc4, Line Code is hdb3, Clock Source is internal
Total Data (Since last clearing of counters)
1 Line Code Violation, 0 Framing Errors
0 CRC Errors, 0 Far End Block Errors
E1 1/3 is administratively down.
ALU# show controller E1 1/2
E1 1/2 is up.
Line Card type is Channelized E1
Line termination is 120ohm
No Alarm Detected
Framing is crc4, Line Code is hdb3, Clock Source is internal
Total Data (Since last clearing of counters)
1 Line Code Violation, 0 Framing Errors
0 CRC Errors, 0 Far End Block Errors
218
Beta
Alcatel-Lucent
OmniAccess 700 CLI Command Reference Guide
Beta
Advertisement
Table of Contents
