Table of Contents
Advertisement
NO ENABLE SECRET
no enable secret
This command is used to delete the established password on the system.
-
NO ENABLE
AUTHENTICATION
no enable-authentication
The 'no' command deletes the existing enable-password configuration, thereby
disabling enable-authentication.
Note:
As a result, console clients will be granted access to the enable-mode without being
prompted the password.
Remote clients will be denied access with the message 'No password Set'.
This is the default behavior.
NO LINE CONSOLE EXEC
no line console exec-timeout
This command removes the time-out configured for CLI session.
NO LINE VTY EXEC
no line vty exec-timeout
This command removes the time-out configured for SSH, Telnet, and Modem
sessions.
NO LOGGING BUFFERED
no logging buffered
This command disables the log messages from getting stored into the memory
buffer.
NO LOGGING CONSOLE PRIORITY
no logging console priority
This command disables the log messages from getting displayed on the console.
NO LOGGING ON
no logging on
This command disables the functionality of logging the messages.
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
-
TIMEOUT
-
TIMEOUT
Alcatel-Lucent
no enable secret
69
Beta
Advertisement
Table of Contents
