Encapsulation Mlfr; Frame Relay Interface Dlci - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Multilink Frame Relay

ENCAPSULATION MLFR

encapsulation mlfr <1-256>
D
ESCRIPTION
This command is entered in the Interface Configuration mode. This command
sets the encapsulation on an interface to MLFR, and attaches it to the bundle
interface configured.
P
ARAMETERS
1-256
D V
EFAULT ALUE
The default encapsulation on a serial interface is HDLC.
E
XAMPLE
ALU(config)#interface Serial1/0:0
ALU(config-if Serial1/0:0)# encapsulation mlfr 100

FRAME RELAY INTERFACE DLCI

frame-relay interface-dlci <16-1007>
D
ESCRIPTION
This command is entered in Interface Configuration mode. This command is used
to configure a DLCI on a MLFR interface.
P
ARAMETERS
16-1007
E
XAMPLE
ALU(config-if mlfr100)# frame-relay interface-dlci 100
296
Beta
Parameter
Parameter
Alcatel-Lucent
Description
Bundle identification. This number can
vary from 1 - 256.
Description
The DLCI value.
OmniAccess 700 CLI Command Reference Guide
Beta