Spanning-Tree Vlan Port-Priority - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Per VLAN Spanning Tree +
-
SPANNING TREE VLAN PORT
spanning-tree [vlan <1-4094>] port-priority <0-255>
D
ESCRIPTION
This command is entered in the Interface mode. This command is used to
prioritize an interface.
Note: - When two bridges compete for position as the root bridge, port-priority command is
used to prioritize an interface.
- PVST+ Port Priority is configured on a per port basis.
P
ARAMETERS
0-255
D V
EFAULT ALUE
The default value for port-priority is: 128
E
XAMPLE
ALU(config-if switchport1/0)# spanning-tree vlan 100 port-
priority 250
182
Beta
-
PRIORITY
Parameter
Alcatel-Lucent
Description
PVST+ port-priority.
OmniAccess 700 CLI Command Reference Guide
Beta