C
15
HAPTER
This chapter documents the Command Line Interface (CLI) commands for the
Point-to-Point Protocol (PPP). These commands are used to configure PPP
encapsulation on a T1 or an E1 line card.
This guide includes table of parameters, default values, and configuration
examples for PPP configurations as quick-start and reference information. In this
guide, all the commands are described in alphabetical order. For more detailed
information about using and configuring the Point-to-Point Protocol, refer to the
OmniAccess 700 CLI Configuration Guide.
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
P
P
OINT TO
OINT
Alcatel-Lucent
Point to Point Protocol
P
ROTOCOL
Beta
257